Mold Remediation – is it possible?

Mold Remediation – is it possible?

Mold is not only horrible to look at but it can also be a dangerous health risk. Therefore mold removal is a vital job that needs precise and careful work to get rid of fully. Mold remediation may sound simple. After all, once the mold is detected it should be removed as soon as possible. However it’s not quite that easy. The issue is that mold occasionally will dry up. When this occurs it will send out spores into the air. These spores not only make more molds but it is also extremely poisonous. Hence, mold remediation is about full removal of all mold.

The following are some general mold inspection and removal ideas. First, the source of the mold should be identified. If you are not capable to find this yourself then getting the support of a mold inspector would be the best thing to do. Once the issue has been identified, it is vital to contain the area. Some persons use visqueen to seal a place off portions of a room to prevent the spread of airborne mold before walls are opened. Whenever doing this kind of work, ensure you are correctly protected by using face masks, wearing gloves and proper protective clothing. In most cases, it is far better to get a professional then try to tackle mold on your own. There are serious  health issue that can arise if you inhale mold airborne mold spores.

In most cases, mold testing by a professional will expose that mold is forming due to moisture or dampness. Mold needs natural matter in order to thrive. This is why if there is the presence of any kind of natural matter, such as wood, and if there is moisture, then this would be a solid recipe for mold formation. Anyway, it is possible to stop mold from spreading if you catch it early. For example, the bathroom is a mold breading ground. The warm steam and moisture, drywall and corners are like incubators. The other places that should be monitored is under sinks in the bathrooms, under the kitchen sink, by window and other places were water might collect. Mold also likes to form around leaky pipes.
If you spot mold in one of these places and the mold has not spread over more than 3 to 4 square feet, then it may be likely you can address the mold problem yourself. But if the mold has spread to a bigger area than that it can be unsafe for an untrained individual to tackle the mold removal. If you have question call a mold removal expert. They will give you advice for free if you can do it your self or if it should be handled by a professional.

If you catch the mold growth before it gets to big a simple way to remove it is by using mild household bleach to wipe it off. Be carful because bleach that is to strong will turn color items white or reduce the shade of the color. This is especially important if you have bright painted walls. So start with heavily deleted bleach first.

Anyway, everyone should know that prevention trumps remediation so when you show or bath, open the windows and turn on the fan to get air flow. If possible, keep your home as dry as possible. The optimum humidity ratio would be 40 to 50 percent humidity and windows should be sealed to stop condensation.
We hope you found this article helpful.

Author Bio